Yaesu Repetidor C4FM

Yaesu DR-1XE FM/C4FM relay 2m / 70cm

Yaesu DR-1XE Repeater DR-1XE Front
Yaesu DR-1XE Repeater rear side DR-1XE Rear

Yaesu offers you the dual mode repeater DR-1XE for a smooth transition from traditional FM mode to digital C4FM modulation. This relay is capable of both operation modes, the automatic mode select (AMS) recognizes the signal as C4FM digital or conventional FM and then the DR-1XE repeater retransmits the signal using the preset communications mode. This makes operating in FM as well as C4FM with only one relay possible.

The DR-1XE relay is shipped as a professional 19" system, an extrnal power supply (13.8V, 15A) is required. The repeater can be used either on 2m (144-146MHz) or 70cm (430-440MHz). Programming is done very comfortably via a large, coloured touch display on the front. With that you can program 'Id' (call sign), transmission and receiving frequency, transmission power (5, 20 or 50W), CTCSS, squelch and the automatic modulation select (AMS). Frequencies can be adjusted in 5 or 6.25 kHz steps.

The device requires 13.8V, max. 15A for operation. The DC cable is included. The repeater has an internal loudspeaker for local checking, also a microphone can be plugged in for testing the transmitter.

The DR-1XE repeater has no diplexer built-in, but needs be added externally. On the rear side there are separate connectors for transmission and receiving antenna available. The transmission power can be adjusted to 5, 20 or 50W. The relay identifier can be transmitted via voice or CW output in adjustable time intervals to meet regulatory requirements for automatic operating units.

  • DR-1XE includes in delivery:
  • DR-1XE relay in a 19" chassis
  • DC cable
  • English manual
  • SCU-20 PC-ACC cable (USB)
Datos Technicos DR-1XE
Function Value
Frequency 144-146MHz, 430-440MHz
Channel Steps 5/6.25 kHz
Antenna Impedance 50 Ω
Power Supply 13.8V, max. 15A
Power Consumption 1.5 A (Receive)
13 A (50 W TX, 144 MHz band)
14 A (50 W TX, 430 MHz band)
Operating Temperature -20 °C to +60°C
Dimensión 483 mm × 89 mm × 38 mm (B×H×T)
Peso 10 kg
TX Power 5/20/50 W
Antenna Connector N female
Modulation F1D, F2D, F3E
Reactance modulation F7 W 4FSK (C4FM)
Spurious Emissions < 60 dBc
Frequency Stability ±2.5 ppm (-20 °C to +60°C)
Type Double Super Heterodyne
Intermediate Frequencies 1st: 47.25 MHz, 2nd: 450 kHz
Antenna Connector N female
RX Sensitivity 0.3 µV (Digital 2 m/70 cm) BER 1%
0.2 µV (FM 2 m/70 cm) 12 dB SINAD
Neighbour Channel Supression < 65 dBc (typ., 20 kHz offset)
Channel Selectivity FM 12 kHz/35 kHz (-6 dB/-60 dB)
Intermodulation < 65 dB (typ., 20 / 40 kHz offset)
Audio Output 4 W (4 Ω, THD 10%, 13.8 V; internal speaker)

Yaesu System Fusion Installation Support Promotion

Yaesu System Fusion Installation Support Promotion

Incentive by Yaesu to support the installation of DR-1XE repeaters!

Buy your new DR-1XE FM/C4FM digital repeater now, and get financial support by Yaesu and WiMo! You receive a 600,-- € cash kickback from Yaesu!

This incentive is handled by WiMo as authorised Yaesu distributor. To claim your incentive cashback money, we need the filled form (see below) returned to us. The following rules apply:

  • The repeater must have been bought at WiMo
  • The repeater should be in operation and should have an official callsign assigned
  • The incentive promotion is valid from August 14., 2014 until December 31., 2015.

This is how the incentive is handled:

  • After purchase, callsign registration and installation of the repeater, you send the filled out form to WiMo.
  • We transfer the information to Yaesu for clearance. If successfully checked, Yaesu will issue a credit note approx. 30 days after receipt of the form.
  • For the cash payout you will receive a money transfer to your bank account from WiMo.

Update Juli 2016:
To simplify the handling of the incentive even more, we now offer the DR-1XE repeater at a price wth the cashback discount already included up front! To benefit from this offer please send the completely filled out application form before we ship the product.

Here is the claim form for the Yaesu DR-1XE incentive (PDF, english, 50KB).

This incentive is valid from 14. August 2014 until 31. December 2017.
Articulo No.
DR-1XE Yaesu VHF/UHF FM/Digital Relais (Cashback issued after sales, completely filled out claim form required after sales) 1099.00 € Comprar Disponible, envio en 1 o 2 diás.
DR-1XE-PROMO Yaesu VHF/UHF FM/Digital Relais (Cashback value already subtracted, completely filled out claim form required with order, only Europe) 499.00 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

Accesorios DR-1XE

Articulo No.
CT-174 Data cable Mini-DIN 10pin-10pin 27.20 € Comprar Disponible, envio en 1 o 2 diás.
CT-175 Data cable Mini-DIN 10pin-6pin 23.40 € Comprar Disponible, envio en 1 o 2 diás.
DR-1XE-CABLE DR-1XE Upgrade cable set 59.00 € Comprar Disponible, envio en 1 o 2 diás.
FVS-2 YAESU Sprachmodul 24.50 € Comprar Disponible, envio en 1 o 2 diás.
HRI-200 YAESU Internet Link Adapter 116.00 € Comprar Disponible, envio en 1 o 2 diás.
MH-48A6J DTMF-Mikrofon 46.30 € Comprar Disponible, envio en 1 o 2 diás.
Gastos de envió

HRI-200 Adaptador de conexión a Internet


Con el HRI-200 los equipos Yaesu C4FM como el FTM-400 o el DR-1 pueden conectarse a internet. Se incluye el software y cables necesarios. El HRI-200 puede controlar 2 equipos al mismo tiempo y escuchar en 4 frecuencias.
La interfaz del HRI-200 soporta todas las funciones del sistema Wires-X como la red del grupo, info local, emergencias etc...
Incluso puede usarse con equipos más antiguos. En ese caso, la interfaz solo funciona en modo FM y se controla por DTMF. Sus funciones son un poquito más limitadas.

La conexión entre el HRI-200 y el PC se hace con el cable suministrado. No hace falta meterle alimentación ni nada más.El software puede configurar el router usando UPnP.

  • En el envio se incluye:
  • HRI-200 Interfaz
  • Mini-DIN 10 Pin (CT-174)
  • Cable de datos Mini-DIN 6 Pin (CT-175)
  • Wires-X Software (CD)
  • Manual (Inglés)
  • Tarjeta de garantia
  • Requisitos de sistema para el HRI-200:
  • OS: Windows Vista/7/8/8.1/10
  • CPU: min. 2GHz
  • HDD: min. 1GB libre en el disco duro
  • RAM: min. 2GB
  • USB: Full-Speed USB (USB-2)
  • Resolución de pantalla: min. 1366x768 o más, 16bit o más
  • Puerto LAN: mind. 100MBit
  • Conexión a Internet: min. 8 Mbps o mas
Articulo No.
HRI-200 Adaptador de conexión a internet Yaesu 116.00 € Comprar Disponible, envio en 1 o 2 diás.
CT-174 Data cable Mini-DIN 10pin-10pin 27.20 € Comprar Nuevo Disponible, envio en 1 o 2 diás.
CT-175 Data cable Mini-DIN 10pin-6pin 23.40 € Comprar Nuevo Disponible, envio en 1 o 2 diás.
Gastos de envió